How to Pass BASIX in Sydney: Common Reasons Plans Fail and How to Fix Them

Plans fail BASIX for a handful of repeat reasons across water, energy and thermal comfort. Here are the causes and the usual fixes.

How to pass BASIX: the quick answer

BASIX checks three things: water, energy and thermal comfort. Most failed results come from the design, not from the paperwork.

The usual fixes are better insulation, smarter windows, shading, an efficient hot water system and, where needed, a rainwater tank or solar panels.

Quick answer

Fix the biggest gap first. A thermal comfort fail is often solved by changing windows, shading or insulation. An energy fail is often solved by the hot water system or solar.

  • Run BASIX early, while the design can still change
  • Check windows, orientation and shading first
  • Choose efficient fixtures and hot water
  • Make sure every commitment is shown on the plans
  • Never change the design after the certificate without rechecking

What BASIX is checking

The tool sets targets for each category and measures your design against them. You must meet all three.

  • Water: use of mains water inside and in the garden
  • Energy: energy use for hot water, heating, cooling, lighting and other fittings
  • Thermal comfort: how the building shell performs, shown through insulation, glazing, orientation and ventilation

Targets are updated from time to time, so use the current BASIX tool.

Common reasons plans fail and how to fix them

Water

  • Not enough efficient fixtures. Fix: choose higher rated showerheads, taps and toilets
  • A large garden or lawn with no water saving. Fix: reduce lawn, use hardy plants or add a rainwater tank
  • A rainwater tank that is too small or connected to too little roof. Fix: increase the tank size or the connected roof area, and plumb it to the right uses
  • A pool or spa that adds water load. Fix: check the pool commitments and cover options

Energy

  • An inefficient hot water system. Fix: choose a more efficient type, such as a heat pump or high efficiency system
  • Heating and cooling that is not efficient enough. Fix: pick better rated systems or limit the areas that need them
  • Poor ventilation or lighting choices. Fix: add efficient lighting and natural ventilation where the tool allows
  • Large floor area using more energy. Fix: add solar panels or reduce the size of conditioned areas

Thermal comfort

  • Too much glass, especially facing west. Fix: reduce the window size, change the glass type or add shading
  • Weak insulation in walls, roof or floor. Fix: increase insulation levels
  • Poor orientation. Fix: move main living areas toward good sun and shading
  • No shading to summer sun. Fix: add eaves, awnings or pergolas
  • Dark roofs and walls in hot areas. Fix: use lighter colours where the tool rewards them
  • Not enough ventilation. Fix: add openable windows that allow cross breezes

The right fix depends on your design. Change one thing at a time and re run the tool, so you can see what helps.

Mistakes that cause failures late in the project

  • The certificate says one thing and the plans show another
  • A builder swaps windows, insulation or fixtures for something cheaper
  • The design changes after the certificate is issued
  • The certificate expires before the application is lodged
  • Commitments are left off the drawings and specifications
  • A certifier asks for evidence on site and it is missing

Because the certifier checks BASIX at several stages, treat the certificate as a build list. Our guide to the construction certificate explains how the checks work.

How to pass first time

  1. Talk to your drafter about BASIX before the design is fixed
  2. Set the orientation, window sizes and shading with BASIX in mind
  3. Choose the hot water, heating and cooling systems early
  4. Run the assessment on a draft design and read the result
  5. Adjust the weakest area, then re run
  6. Put every commitment on the drawings and specifications
  7. Give the builder a copy of the certificate and check substitutions against it

When to get professional help

  • The result is close but still failing
  • You are using a thermal modelling method and the numbers are tight
  • Your block faces the wrong way or has little space for a tank or solar
  • You are changing the design late and need to recheck it
  • You are not sure which commitments the certifier will want to see

Read when you need a BASIX certificate if you are not sure your project needs one.

Your next step

Send us your plans and your BASIX result. We will tell you what is causing the fail, suggest the practical fixes and quote a fixed fee for the updated drawings and certificate before any work begins.

Passing BASIX questions Sydney homeowners ask

What is the most common reason plans fail BASIX?

It varies, but large windows, weak insulation, poor shading and an inefficient hot water system come up often. A drafter can tell you which one is causing yours.

Can I fix a BASIX fail without redrawing the whole house?

Often yes. Changing glass type, insulation, shading or the hot water system can lift the result without changing the layout.

Do I need a rainwater tank to pass BASIX?

Not always. It depends on your water score. A tank is one of several ways to improve it.

Do solar panels help BASIX?

They can improve the energy score. Whether you need them depends on your design and the targets.

Can the builder change materials after the certificate is issued?

Changes can affect the result. Check any substitution against the certificate before you agree.

What if I changed the design after getting the certificate?

The certificate may no longer match. Run the assessment again before lodging or building.

Plans failing BASIX?

Send us your plans and the BASIX result. We will suggest the fixes and quote a fixed fee before any work begins.

Request a Fixed Fee Quote

0404 013 693 GET A QUOTE