Do You Need Council Approval to Renovate in Sydney?
A simple way to work out whether your renovation needs approval, what skipping it can cost you and who to ask before you start.
Do you need council approval to renovate? The quick answer
Sometimes. Small, low impact work can be exempt, which means no approval is needed. Bigger work needs either a complying development certificate (CDC) or a development application (DA).
Many internal renovations are simple. The risk is assuming yours is, when it touches structure, plumbing, use of a room, heritage or overlays on your land.
Quick answer
Check three things before you start: what the work changes, what controls apply to your land, and whether it meets the exempt standards. If you are unsure, ask a draftsman or building designer before you book a builder.
A simple test for your renovation
Answer these questions in order.
- Does the work change the structure, such as walls, beams or the roof?
- Does it add floor area or another level?
- Does it change how a room is used, such as a garage to a bedroom?
- Is your home heritage listed or in a conservation area?
- Is the land affected by bushfire, flood or other controls?
- Is it outside what exempt development allows?
If you answer yes to any of these, you probably need an approval or at least advice before you start.
When approval is usually not needed: exempt development
Exempt development is minor work that meets set standards and needs no approval. It is set by state planning rules and has conditions.
- Cosmetic work such as painting, flooring and new fixtures
- Replacing a kitchen or bathroom fit out without structural change
- Some minor internal alterations
- Some small outdoor structures that meet the size and location limits
Be careful
Exempt does not mean free of rules. You still need to meet the standards and any building, plumbing and safety requirements. Land with heritage or other controls may lose the exemption.
Which renovations usually need approval?
Structural changes
Removing or changing load bearing walls needs engineering and often approval. A non load bearing wall is a different matter, but you need to know which is which.
Kitchens and bathrooms
A like for like fit out is often straightforward. Moving plumbing, changing layouts or altering structure raises the stakes. Waterproofing and plumbing work must still meet the rules.
Garage conversions and room changes
Turning a garage into living space changes how the building is used. It usually needs approval and has to meet standards for light, ventilation, ceiling height and fire safety.
Extensions and extra levels
Adding floor area or a second storey normally needs a CDC or DA, with drawings, engineering and a BASIX certificate.
Heritage and constrained land
If your home is heritage listed or in a conservation area, even small changes can need approval.
What happens if you skip approval?
- Councils can issue orders to stop work
- You may face fines
- You may have to change or remove the work
- It can be hard to get a final certificate
- Problems can show up when you sell
- Insurance and builder warranty issues can arise
Approval protects you as well as the neighbours. It shows the work meets the rules.
How to check what applies to your land
- Get a Section 10.7 planning certificate, which lists controls on your property
- Check your council's local plan for your zone
- Look up heritage and conservation listings
- Ask a draftsman or building designer
- Ask a private certifier or your council before starting
Our guide on council approval for renovations is a good place to start, and our room by room guide covers each type of work.
For homes in the Shire, our page on Sutherland Shire council approvals covers the local plan and DA or CDC options.
What to do next
- Write down exactly what you want to change
- Check your land for controls
- Ask which approval pathway fits
- Get drawings made if approval is needed
- Lodge the application and wait for approval
- Only then book the builder to start
Your next step
Not sure whether your renovation needs approval? Tell us what you want to change and we will tell you what to check first.
Renovation approval questions Sydney homeowners ask
Do I need council approval for internal renovations?
Not always. Cosmetic work and some minor changes can be exempt. Structural changes, changes of use and work on heritage or constrained land often need approval.
What is exempt development?
Exempt development is minor work that meets set standards and needs no approval. The standards are set by state planning rules.
Do I need approval to remove a wall?
It depends on whether the wall carries load. Ask an engineer or draftsman before you remove anything.
Do I need approval to renovate a kitchen or bathroom?
A like for like refit is often exempt. Changes to plumbing, layout or structure may need approval. Plumbing and waterproofing work must still comply.
What is a Section 10.7 planning certificate?
It is a certificate from council that lists the planning controls that apply to your land.
Who decides if my renovation needs approval?
The planning rules decide, and councils and certifiers apply them. A draftsman or building designer can tell you what is likely to apply.
Not sure if your Sydney renovation needs approval?
Tell us about your project. We will explain which drawings and approvals it needs and give you a fixed fee quote before any work begins.