Granny Flat Rules in Sydney: Size, Setbacks and Lot Requirements
The main NSW rules for granny flats explained simply: how big one can be, what lot you need and how setbacks and site conditions affect your plans.
Granny flat rules in Sydney: the quick answer
Three things decide whether a granny flat is allowed: the size of your lot, the size of the granny flat and how far it sits from your boundaries.
As a general baseline, state rules limit a secondary dwelling to about 60 square metres of floor area, unless your council's local plan allows more. For the fast track CDC pathway, the lot is generally at least 450 square metres in most residential zones.
Check the current rules
Planning rules for granny flats change from time to time and local plans vary. Treat this as a general guide and confirm the current rules for your lot before you commit to a design.
What counts as a granny flat?
In NSW the planning term is a secondary dwelling. It is a self contained home on the same lot as your main house.
- It has its own kitchen, bathroom and living area
- It can be detached, attached or inside the main house
- It is built on the same title as the main house
- It can usually be rented to anyone, not only family
- It generally cannot be sold separately from the main house
How big can a granny flat be?
State planning rules set a general cap on floor area. Some local plans allow a larger size. The combined size of the main house and granny flat also has to stay within the limits for your lot.
| Rule | General baseline | What to check |
|---|---|---|
| Granny flat floor area | Up to about 60 square metres | Whether your council allows a larger size |
| Total floor area on the lot | Limited by the controls for your lot size | The limit for your zone and lot |
| Lot size for CDC | Generally at least 450 square metres in most residential zones | Smaller lots may still be possible through a DA |
| Number on a lot | Generally one | Your council's controls |
Lot requirements
- Your land must be in a zone that allows secondary dwellings
- You usually need an existing or approved main house on the lot
- Lot size and width must meet the standards
- Strata and community title lots are often treated differently
- Land with heritage, flood, bushfire or environmental controls may need more approvals
A Section 10.7 planning certificate lists the controls on your land. It is a good place to start.
Homeowners in the Sutherland Shire can see how local controls apply in the Shire.
Granny flat setbacks
A setback is the distance between the building and a boundary. Required distances usually depend on your lot size and zone.
- Distance from the side boundaries
- Distance from the rear boundary
- Distance from the front boundary
- Distance from certain trees
- Clearances around easements, drains and services
Setbacks are shown on the site plan. A drafter checks them before the design is locked in.
Other rules that affect your design
Private open space
The main house usually needs to keep a minimum amount of private outdoor space after the granny flat is built.
Parking
Check whether your council requires parking for a secondary dwelling.
Services
Water, sewer, power and stormwater need to connect properly. Sewer and drainage can affect where you can build.
Bushfire, flood and heritage
These controls can limit design, materials and position.
BASIX
A new secondary dwelling needs a BASIX certificate as part of the approval.
Can you convert part of your house into a granny flat?
Yes, in some cases. A secondary dwelling inside the main house is treated differently from a detached one, and some lot rules may not apply in the same way. You still need approval and the work must meet the building code and fire safety rules.
Designing plans that comply
- Start with a survey and the planning certificate
- Keep the floor area within the limit
- Draw the setbacks from the survey, not from guesswork
- Place the building clear of trees and easements
- Plan the services connections early
- Ask your drafter to check the design against the standards before you lodge
Our guides on granny flat approval and whether you can build one on your block explain the next steps.
This checking is part of our residential drafting services.
Your next step
Send us your address and we will check the rules for your lot and tell you what size and position could work.
Granny flat rule questions Sydney homeowners ask
What is the maximum size of a granny flat in NSW?
State rules set a general floor area cap of about 60 square metres, unless your council's local plan allows more. Check the current rules for your lot.
What size lot do I need for a granny flat?
For the CDC pathway the lot is generally at least 450 square metres in most residential zones. Smaller lots may be approved through a DA where the council allows it.
Can I build two granny flats on one property?
Generally only one secondary dwelling is allowed per lot. Check your council's controls.
How far from the boundary must a granny flat be?
Setbacks depend on your lot size and zone. Your drafter can read them from your survey and the planning controls.
Can I rent out a granny flat?
Usually yes, and not only to family. Check any conditions that apply to your lot.
Do I need a BASIX certificate for a granny flat?
Yes. A new secondary dwelling needs a BASIX certificate as part of the approval.
Want to know what granny flat your Sydney lot allows?
Tell us about your project. We will explain which drawings and approvals it needs and give you a fixed fee quote before any work begins.