LEP vs DCP in Sydney: How Council Planning Rules Affect Your House Plans
The LEP sets the big rules for your land and the DCP sets the detail. Here is what each does and how both shape your house plans.
LEP vs DCP: the quick answer
A local environmental plan (LEP) is the main planning rulebook for a council area. It sets what each piece of land can be used for and the key limits on building size.
A development control plan (DCP) adds the detail. It covers things like setbacks, landscaping and design expectations. Your house plans need to work with both.
Quick answer
The LEP says what you can build and how big. The DCP says how it should be designed. Check both before you draw plans.
The LEP usually covers
- Zoning and what uses are allowed
- Maximum building height
- Floor space ratio, where it applies
- Minimum lot sizes
- Heritage items and conservation areas
The DCP usually covers
- Front, side and rear setbacks
- Site coverage and landscaped area
- Privacy and overshadowing
- Parking and driveways
- Streetscape and design character
What is a local environmental plan (LEP)?
An LEP is a legal planning document made under NSW planning law. Each council area has one. It is the first place to look when you want to know what your land allows.
1. It zones the land
Zoning decides what can be built, such as houses, duplexes or shops. A house that is allowed in one zone may not be allowed in another.
2. It sets key development standards
These are limits such as building height, floor space ratio and minimum lot size. They are hard to vary, though a formal request to vary a standard is sometimes possible.
3. It flags special considerations
Heritage, flood, bushfire and environmentally sensitive areas are often identified through the LEP or its maps.
What is a development control plan (DCP)?
A DCP is a council document with detailed guidelines for the design of buildings. It explains how council wants development to look and perform.
What a DCP does
- Sets setbacks from the front, side and rear boundaries
- Limits site coverage and requires landscaped areas
- Protects neighbours' privacy and sunlight
- Guides design to suit the street
- Sets parking and access expectations
DCPs differ between councils
Two councils can have different rules for the same type of home. Never assume rules from one suburb apply in another.
Do you have to follow a DCP?
Council must consider the DCP when it assesses your DA. It is a guide, not a rigid law, and council can allow flexibility when the aims of the control are still met. Some outcomes are far easier to win than others, so ask your drafter early.
LEP and DCP side by side
| LEP | DCP | |
|---|---|---|
| What it is | Legal planning instrument for the council area | Council guide to design detail |
| Main focus | Zoning, height, floor space ratio, lot size, heritage | Setbacks, site coverage, landscaping, privacy, design |
| Flexibility | Low. Variations need a formal process | Higher, if the objectives are still met |
| Where you find it | Council or the NSW legislation site, with maps | Your council's website |
| Differs by council | Yes | Yes, often a lot |
State planning policies can also override local rules in some cases, such as complying development and secondary dwellings. Our guide to DA vs CDC shows where that matters.
How they shape your house plans
- The zone decides what type of home you can build
- The LEP limits how tall and how big the building can be
- The DCP sets where the walls can sit on the block
- Site coverage and landscaping rules limit the footprint
- Privacy and solar access rules shape windows and upper floors
- Heritage controls can limit demolition and changes
Together these decide the building envelope, which is the space your design must fit inside.
How to check the rules for your block
- Order a planning certificate from your council, or check the council's online maps
- Read the zoning and any heritage, flood or bushfire flags
- Find the height and floor space ratio limits in the LEP, if they apply
- Open the council's DCP and read the sections for your type of project
- Ask your drafter to turn the rules into a buildable envelope
Our guide to floor space ratio and our guide to height limits, setbacks and site coverage cover the main controls in more detail.
Mistakes people make with planning rules
- Reading only the LEP and missing DCP setbacks
- Using a neighbour's approval as proof that your design will pass
- Assuming the rules from another council apply
- Buying a block before checking what can be built on it
- Using old versions of the plans, which councils update from time to time
- Leaving heritage and flood checks until after the design is done
Your next step
Send us your address and what you want to build. We will check the LEP and DCP for your block, show you what the rules allow and quote a fixed fee for the drawings before any work begins.
Start with the site checks in is your block suitable for a knockdown rebuild if you are thinking of rebuilding.
LEP and DCP questions Sydney homeowners ask
Which is more important, the LEP or the DCP?
The LEP sets the firm limits, and the DCP sets the design detail. You need to meet both, but the LEP is harder to vary.
Where do I find my LEP and DCP?
Your council's website lists its DCP, and the LEP and its maps are available through the NSW legislation and planning websites. A planning certificate summarises what applies to your land.
Can council approve a design that breaks the DCP?
Sometimes. If the aims of the control are still met, council can allow flexibility. It is not guaranteed.
Can I vary an LEP standard?
In some cases a formal request to vary a standard can be made. It is harder than varying a DCP control, so it is better to design within the limit.
Do LEP and DCP rules apply to a CDC?
A CDC follows state standards instead, which are fixed. Your drafter can tell you which rules apply.
Do the rules change?
Yes. Councils amend their LEPs and DCPs from time to time, so always check the current version.
Want the planning rules for your block explained?
Send us your address. We will explain what the LEP and DCP allow and quote a fixed fee for the drawings before any work begins.