Height Limits, Setbacks and Site Coverage in Sydney: What Councils Check on Residential Plans
Councils check how tall you build, how close you build to the boundary and how much of the lot you cover. Here is what each control means.
What do councils check? The quick answer
Councils check three things on most home plans. How tall the building is, how far it sits from the boundaries and how much of the lot it covers.
Together they create a building envelope. Your design needs to sit inside it, unless council agrees to flexibility.
Quick answer
Height is usually set in the LEP. Setbacks and site coverage are usually set in the DCP. Check both for your block.
- Height: how tall the building can be
- Setbacks: how far walls must sit from boundaries
- Site coverage: how much of the lot the building covers
- Landscaped area: how much of the lot must stay soft and green
- Privacy and sunlight: how the design affects neighbours
Height limits
A height limit caps how tall the building can be. Sydney councils often set a maximum height in metres in the LEP. The DCP may add limits on wall height and the number of storeys.
How height is measured
The LEP defines it. It is generally measured from the existing ground level up to the highest part of the building. Check your LEP's exact wording.
What affects your height
- Slope, because the existing ground level changes across the lot
- Roof shape and pitch
- Ceiling heights and floor to floor distances
- Flood levels that lift the floor
- Heritage or character controls
Setbacks
A setback is the distance between your building and a boundary. Setbacks keep space around buildings for light, privacy, access and street appearance.
Common setback types
- Front setback, often matched to nearby homes
- Side setbacks, which may depend on wall height or lot width
- Rear setback
- Secondary street setback on a corner lot
- Extra setbacks for upper floors in some areas
What can change a setback
- The pattern of neighbouring buildings
- Easements and services
- Heritage controls
- Bushfire or flood requirements
- Whether your project uses a CDC, which has its own fixed setbacks
Site coverage and landscaped area
Site coverage is the share of the lot covered by buildings. Councils often pair it with a minimum landscaped area, so part of the lot stays soft and green.
A simple example
This example uses made up numbers only. If a limit of 45 per cent applied to a 500 square metre lot, buildings could cover at most 225 square metres of the ground.
What may count and what may not
- Houses, garages and covered areas are often counted
- Eaves, small structures or paving may be treated differently
- Landscaped area definitions vary by council
- Pools and decks may count in some DCPs and not in others
Always check your own council's definitions.
Why councils check these controls
- To keep the scale of buildings in line with the street
- To protect neighbours' privacy and sunlight
- To keep space for trees, gardens and water to soak in
- To make sure access and services work
- To manage the look and feel of an area
Can you build outside the limits?
Sometimes. How depends on which control it is and which approval path you use.
- A DCP control may be varied if council agrees the aims are still met
- An LEP standard needs a formal request to vary it, which is harder
- A CDC allows no variation at all
- A well argued design with good reasons has a better chance
The safest approach is to design within the limits. Our guide to DA vs CDC explains why a CDC cannot flex.
How to design inside the envelope
- Get the LEP and DCP controls for your block
- Get a survey, so levels and boundaries are accurate
- Draw the building envelope from height, setbacks and coverage
- Design the floor plan to fit inside it
- Check privacy, overshadowing and landscaping
- Test the design against every control before you lodge
Read LEP vs DCP for how the rules fit together, and floor space ratio for floor area.
Your next step
Send us your address. We will map the controls for your block, show you the building envelope and quote a fixed fee for the drawings before any work begins.
If you plan a granny flat, see granny flat rules in Sydney for the controls that apply to them.
Height, setback and site coverage questions Sydney homeowners ask
What is the height limit for a house in Sydney?
It depends on your council and zone. Look at the height map in your LEP and the DCP for wall height and storeys.
How far must I build from the boundary?
Setbacks are set in the DCP and vary by council, lot and type of project. Your drafter can read them for your block.
What is site coverage?
It is the share of the lot covered by buildings. Councils use it to keep space for gardens and trees.
Do eaves count towards site coverage?
It depends on the council's definition. Check your DCP.
Can a neighbour's approval guide my design?
It can help, but their block, date and rules may be different. Your design must be checked on its own.
Do these controls apply to a CDC?
A CDC uses fixed state standards, which may differ from council rules. Your drafter can confirm which apply.
Want your building envelope mapped?
Send us your address. We will map the height, setback and coverage controls and quote a fixed fee for the drawings before any work begins.